Flight UFC3259
|
|
Additional Log Information:
[17:36] - C46A BUFFALO C-GTXW
[17:36] - Flight UFC3259 is ready to depart KRNC with a final destination of KGVL.
[17:36] - Parking Brake Applied
[17:36] - Boarding
[17:36] - Parking Brake Released
[17:36] - Taxiing to Runway
[17:36] - Taking Off with 31 passengers on board
[17:37] - Take off at 88kts, with a pitch of 6deg and 3664lbs of fuel on board
[17:37] - Wind Heading 0 | Wind Speed 0kts | Temperature 13 deg C
[17:37] - AutoPilot Engaged at 115AGL
[17:37] - Climbing to TOC
[17:43] - TOC reached
[17:43] - Cruise started
[18:21] - AutoPilot Disengaged at 905AGL
[18:23] - Landed at -233fpm. With 2952lbs of fuel onboard and a pitch angle of 1deg.
[18:23] - Wind Heading 0 | Wind Speed 0kts | Temperature 14 deg C
[18:23] - Taxiing to Gate
[18:23] - Parking Brake Applied
[18:23] - Arrived safely at KGVL. We hope you enjoyed your flight!
[18:23] - C46A BUFFALO C-GTXW
[18:23] - AFK Attempts: 0
[18:23] - AFK minutes: 0
[18:23] - MaxSim Rate: 1x
[18:23] - ver 1.0.1.7
[17:36] - Flight UFC3259 is ready to depart KRNC with a final destination of KGVL.
[17:36] - Parking Brake Applied
[17:36] - Boarding
[17:36] - Parking Brake Released
[17:36] - Taxiing to Runway
[17:36] - Taking Off with 31 passengers on board
[17:37] - Take off at 88kts, with a pitch of 6deg and 3664lbs of fuel on board
[17:37] - Wind Heading 0 | Wind Speed 0kts | Temperature 13 deg C
[17:37] - AutoPilot Engaged at 115AGL
[17:37] - Climbing to TOC
[17:43] - TOC reached
[17:43] - Cruise started
[18:21] - AutoPilot Disengaged at 905AGL
[18:23] - Landed at -233fpm. With 2952lbs of fuel onboard and a pitch angle of 1deg.
[18:23] - Wind Heading 0 | Wind Speed 0kts | Temperature 14 deg C
[18:23] - Taxiing to Gate
[18:23] - Parking Brake Applied
[18:23] - Arrived safely at KGVL. We hope you enjoyed your flight!
[18:23] - C46A BUFFALO C-GTXW
[18:23] - AFK Attempts: 0
[18:23] - AFK minutes: 0
[18:23] - MaxSim Rate: 1x
[18:23] - ver 1.0.1.7
Comments
Commenter | Comment |
---|---|
Richard Peabody | It was a DC3 not a C46A I had to go change the cfg file back. |